Interdisciplinary Journal of Civil Engineering

Interdisciplinary Journal of Civil Engineering

A Conservation-Oriented Seismic Assessment and Targeted CFRP Strengthening Strategy for Sib Castle, Iran

Document Type : Original Article

Authors
Department of Civil Engineering, ZAH.C., Islamic Azad University, Zahedan, Iran
Abstract
Historic adobe monuments are vulnerable to seismic cracking, yet retrofit studies rarely address irregular three-dimensional geometry alongside conservation constraints. This study assessed Sib Castle, Iran, using a nonlinear Abaqus macro-model with Concrete Damaged Plasticity to identify critical regions and compare targeted grid and diagonal carbon-fibre-reinforced polymer (CFRP) layouts. Model response was checked against an adobe wall tested under in-plane cyclic loading; the experimental first loading branch and numerical pushover differed by 1.55% in integrated force–displacement area. Three pairs of horizontal ground motions (Tabas, Kobe and Sarpol-e Zahab), scaled with reference to Iranian Standard 2800, were applied in nonlinear response-history analyses. In the unstrengthened castle, tensile demand concentrated around openings, wall intersections and roof interfaces. Under the Tabas record, peak principal tensile stress decreased from 5.26 MPa to 0.191 MPa with grid strengthening and 0.193 MPa with diagonal strengthening. First-storey X-direction relative displacement decreased from 22 cm to 5 cm and 19 cm, respectively, representing reductions of 77.3% and 13.6%. The grid layout performed better in this direction, although improvements were not uniform across directions. These findings support targeted CFRP intervention while acknowledging the idealised bonded interface.
Keywords

Abdulla, K. F., Cunningham, L. S., & Gillie, M. (2021). Out-of-plane strengthening of adobe masonry using hemp fiber ropes: An experimental investigation. Engineering Structures, 245, 112931. https://doi.org/10.1016/j.engstruct.2021.112931
Castellazzi, G., D’Altri, A. M., de Miranda, S., & Ubertini, F. (2017). An innovative numerical modeling strategy for the structural analysis of historical monumental buildings. Engineering Structures, 132, 229–248. https://doi.org/10.1016/j.engstruct.2016.11.032
Dassault Systèmes. (n.d.). Abaqus analysis user’s guide: Concrete damaged plasticity. SIMULIA.
Eslami, A., Zahedi, A., & Mirabi Banadaki, H. (2021). In-plane seismic behavior of NSM strengthened adobe walls: Experimental evaluation of different reinforcements. Engineering Structures, 246, 113016. https://doi.org/10.1016/j.engstruct.2021.113016
Fakouri-Nejad, A. (2025). Seismic analysis of Sib Castle, Saravan, and strengthening using FRP [Master’s thesis, Islamic Azad University, Zahedan Branch]. [In Persian].
Ghiassi, B., Marcari, G., Oliveira, D. V., & Lourenço, P. B. (2013). Water degrading effects on the bond behavior in FRP-strengthened masonry. Composites Part B: Engineering, 54, 11–19. https://doi.org/10.1016/j.compositesb.2013.04.074
International Council on Monuments and Sites (ICOMOS). (2003). Principles for the analysis, conservation and structural restoration of architectural heritage. https://www.icomos.org/images/DOCUMENTS/Charters/structures_e.pdf
Mirjalili, A., Eslami, A., & Morshed, R. (2020). Experimental investigation into the effect of vertical loading on in-plane cyclic behavior of adobe walls. Construction and Building Materials, 264, 120706. https://doi.org/10.1016/j.conbuildmat.2020.120706
Petrovčič, S., & Kilar, V. (2022). Design considerations for retrofitting of historic masonry structures with externally bonded FRP systems. International Journal of Architectural Heritage, 16(7), 957–976. https://doi.org/10.1080/15583058.2020.1853278
Road, Housing and Urban Development Research Center. (2014). Iranian code of practice for seismic resistant design of buildings (Standard No. 2800, 4th ed.).
Sika. (2006, June 13). SikaWrap-230 C: Woven carbon fiber fabric for structural strengthening [Product data sheet]. https://www.petrolinetech.com/wp-content/uploads/2021/12/SikaWrap-230-C.pdf
Sika. (n.d.). SikaWrap®-230 C: Product data. https://aus.sika.com/en/construction/structural-strengthening/shear-strengthening/sikawrap-230-c.html
Vaculik, J., Visintin, P., Burton, N. G., Griffith, M. C., & Seracino, R. (2018). State-of-the-art review and future research directions for FRP-to-masonry bond research: Test methods and techniques for extraction of bond-slip behavior. Construction and Building Materials, 183, 325–345. https://doi.org/10.1016/j.conbuildmat.2018.06.103
Valluzzi, M. R., Modena, C., & de Felice, G. (2014). Current practice and open issues in strengthening historical buildings with composites. Materials and Structures, 47, 1971–1985. https://doi.org/10.1617/s11527-014-0359-7